|
18/10/2009
- Complete & rivet main bulkhead and seat back bulkhead
With the parts back from being primed I could
finish off the wing bulkhead and then make a start of putting
together the seat back bulkhead.
Read the plans very carefully here !! as it
is easy, as I found out to
 | Rivet holes required to
be left open till later! |
| Rivet up sections that
require you to have riveted another are first ! |
Did not quite finish the
bulkhead before the end of the day, will need to pick up next time |
![[18102009] - Wings](_derived/[10182009]%20-%20Fuselage.htm_cmp_travel01_flash_v2010_bnr.gif){kind=small}
